70-680 Guide

70-680 Exam Royal Pack (In Stock.)

  • Microsoft
  • Exam Number/Code 70-680
  • Product Name TS:Windows 7,Configuring
  • Questions and Answers
  • 545 Q&As
  • Last Updated
  • July 24,2017
  • List Price
  • $128.99
  • Price
  • Today 59.99 USD

Free TrialVersion: demo Buy Now 50% OFF

Amazing microsoft 70 680 secrets

Ucertify offers free demo for mcts 70 680 exam. "TS:Windows 7,Configuring", also known as microsoft 70 680 exam, is a Microsoft Certification. This set of posts, Passing the Microsoft 70 680 pdf exam, will help you answer those questions. The microsoft 70 680 Questions & Answers covers all the knowledge points of the real exam. 100% real Microsoft 70 680 pdf exams and revised by experts!

Q321. - (Topic 1) 

You have a stand-alone computer that runs Windows 7. 

You open Windows Update as shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that you can manually change the Windows Update settings on the computer. 

What should you do? 

A. Log on to Windows 7 as member of the Administrators group. 

B. From the local Group Policy, modify the Windows Update settings. 

C. Right-click Windows Update and select Run as administrator. 

D. Right-click the command prompt, select Run as administrator, and then run Wuapp.exe. 



Configuring Automatic Updates by using local Group Policy 

1. Click Start, and then click Run. 

2. Type gpedit.msc, and then click OK. 

3. Expand Computer Configuration. 

4. Right-click Administrative Templates, and then click Add/Remove Templates. 

5. Click Add, click Wuau.adm in the Windows\\Inf folder, and then click Open. 

6. Click Close. 

7. Under Computer Configuration, expand Administrative Templates, expand Windows Components, and then expand Windows Update. 

Q322. - (Topic 4) 

You have a computer that runs Windows 7. Your computer s disk configuration is shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that you can create a striped volume on the computer. 

What should you do? 

A. Add an additional hard disk. 

B. Convert all disks to dynamic disks. 

C. Install a digitally-signed disk driver. 

D. Set the Startup Type of the Virtual Disk Service (VDS) to Automatic. 



A striped volume is a dynamic volume that stores data in stripes on two or more physical disks. Data in a striped volume is allocated alternately and evenly (in stripes) across the disks. Striped volumes offer the best performance of all the volumes that are available in Windows, but they do not provide fault tolerance. If a disk in a striped volume fails, the data in the entire volume is lost. 

You can create striped volumes only on dynamic disks. Striped volumes cannot be extended. 

You can create a striped volume onto a maximum of 32 dynamic disks. 

Backup Operator or Administrator is the minimum membership required to complete the actions below. 

Creating a striped volume 

Using the Windows interface 

Using a command line 

To create a striped volume using the Windows interface 

In Disk Management, right-click the unallocated space on one of the dynamic disks where you want to create the striped volume, and then click New Striped Volume…. 

Follow the instructions on your screen. 

To create a striped volume using a command line 

Open a command prompt and type diskpart. 

At the DISKPART prompt, type list disk. Make note of the number of the disk where you want to create a striped volume. 

At the DISKPART prompt, type create volume stripe [size=<size>] 



Q323. - (Topic 1) 

Which of the following utilities can you use to transfer user encryption certificates from a computer running Windows XP Professional to Windows 7 Professional? Choose two. 

A. File Settings and Transfer Wizard 


C. Windows Easy Transfer 

D. Robocopy.exe 

Answer: B,C 

Q324. - (Topic 6) 

You have a Windows 7 computer in a workgroup. Multiple users with different local user accounts share the computer. 

You need to restrict the rights so that only Administrators can download and install Windows Updates. 

What should you do? 

A. Set the Allow all users to install updates option on this computer to Unchecked. 

B. Configure Windows Updates to download updates but let you choose to install them. 

C. Turn off Automatic Updates. 

D. Remove all local users from the Administrators security group. 


Explanation: Ref: http://windows.microsoft.com/en-us/windows/updates-faq#1TC=windows-7 

Q325. HOTSPOT - (Topic 6) 

You are a system administrator for a regional accounting firm. The existing computers have either Windows Vista Enterprise or Windows Vista Home Premium installed. 

Your manager wants you to upgrade all computers to Windows 7. 

You need to determine which editions of Windows 7 support an in-place upgrade from the two editions of Windows Vista. 

In the table below, identify which editions of Windows 7 will support an in-place upgrade from Windows Vista Enterprise and Home Premium. (Make only one selection in each column. This question is worth two points. ) 


Q326. - (Topic 2) 

You have two portable computers that run Windows 7. The computers are not connected to a network. 

The computers are configured as shown in the following table. 

You need to transfer a 1-gigabit file from Computer1 to Computer2. What should you do first? 

A. On Computer1, create a wireless ad hoc network. 

B. On Computer2, configure the Bluetooth File Transfer Wizard to send files. 

C. On Computer2, create a network profile to connect to a network named Homegroup. 

D. On Computer1, configure the computer to be a member of a workgroup named Homegroup. 


Explanation: Wireless Ad Hoc network You can set up a temporary wireless network, or ad hoc network, between two or more computers running Windows 7 (or between computers running Windows 7 and Windows Vista) provided they are all within 30 feet (9 meters) of each other. A WAP is not required to set up an ad hoc network. This enables users to share folders and other resources without needing to connect to an organizational network. On the first computer on the network, you open Network And Sharing Center and click Set Up A New Connection Or Network. You then choose the option Set Up A Wireless Ad Hoc (Computer To Computer) Network. You give the network a name and (if you want) set up a security key so that users joining the network need to supply a password. For WEP, this can be 5 case-sensitive characters, 13 case-sensitive characters, 10 hexadecimal caseinsensitive characters, or 26 hexadecimal case-insensitive characters, depending on security considerations. (If you choose WPA-2 Personal, you can insist on a 64-character password, but by the time everyone has typed it in correctly, the meeting would probably be over.)BluetoothWindows supports Bluetooth version 1.1 and later versions. Windows does not support Bluetooth version 1.0 because that specification lacks several critical updates that Windows requires to support Bluetooth wireless technology well. 

Q327. - (Topic 4) 

A company has a server running Windows Server 2008 R2, with Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK) set up. The company also has client computers running Windows 7 Enterprise. 

You need to capture an image of a client computer. 

What should you do on the server before performing actions on the client computer? 

A. Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Mo. 

B. Run the DiskPart command and the Attach command option. 

C. Use Sysprep with an answer file and set the PersistAHDevicelnstalls option in the answer file to False. 

D. Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Yes. 

E. Add a boot image and create a capture image in WDS. 

F. Run the BCDEdit /delete command. 

G. Run the Dism command with the /Add-Driver option. 

H. Run the ImageX command with the /Mount parameter. 

I. Run the Dism command with the /Add-Package option. 

J. Use Sysprep with an answer file and set the PersistAHDevicelnstalls option in the answer file to True. 

K. Run the Start/w ocsetup command. 

L. Run the Dism command with the /Mount-Wim option. 

M. Run the PEImg /Prep command. 


Q328. - (Topic 3) 

You have a computer that runs Windows 7. 

You install Windows XP in a new partition on the computer and discover that you can no longer start Windows 7. 

You need to start Windows 7 in the minimum amount of time. 

What should you do? 

A. From Windows XP, modify the default path in the boot.ini file. 

B. From Windows XP Recovery Console, run the Fixboot command. 

C. Start the computer from the Windows 7 installation media and select Install now. 

D. Start the computer from the Windows 7 installation media and run Startup Repair. 


Explanation: When configuring a new computer to boot between multiple operating systems, it is also necessary to install operating systems in the order that they were released. For example, if you want to boot between Windows XP and Windows 7 on a new computer, you need to install Windows XP before you install Windows 7. If you install Windows XP after Windows 7, the Windows XP installation routine cannot recognize the Windows 7 operating system installation and the computer only boots into Windows XP. It is possible to repair the computer from this point using Windows 7 startup repair so that it dual-boots, but the simplest course of action is just to install the operating systems in the order in which they were released 

Q329. - (Topic 5) 

You plan to install Windows 7 on a new portable computer. 

The computer will be shared by users who speak English, French, and German. 

You need to select an edition of Windows 7 that enables users to change languages as required. 

Which edition should you choose? 

A. Starter 

B. Ultimate 

C. Home Premium 

D. Professional 


Q330. - (Topic 4) 

You have two computers named Computer1 and Computer2 that run Windows 7. 

Computer1 has a dynamic disk. 

You remove the disk from Computer1 and connect the disk to Computer2. 

You need to ensure that you can open files on all hard disk drives connected to Computer2. 

What should you do from the Disk Management snap-in? 

A. Convert a disk. 

B. Rescan the disks. 

C. Import a foreign disk. 

D. Attach a virtual hard disk (VHD). 



10199 2074 20229 Moving Disks to Another Computer Before you move disks to another computer, you should use Disk Management to make sure the status of the volumes on the disks is Healthy. If the status is not Healthy, you should repair the volumes before you move the disks. To verify the volume status, check the Status column in the Disk Management console. Your next step is to uninstall the disks you want to move. In the Computer Management Navigation pane (the left pane), open Device Manager. In the device list, double-click Disk Drives. Right-click each of the disks you want to uninstall in turn and then click Uninstall. In the Confirm Device Removal dialog box, click OK. If the disks that you want to move are dynamic disks, right-click the disks that you want to move in Disk Management, and then click Remove Disk. After you have removed dynamic disks, or if you are moving basic disks, you can disconnect the disk drives physically. If the disks are external, you can now unplug them from the computer. If they are internal, turn off the computer and then remove the disks. If the disks are external, plug them into the destination computer. If the disks are internal, make sure the computer is turned off and then install the disks in that computer. Start the destination computer and follow the instructions on the Found New Hardware dialog box. On the destination computer, open Disk Management, click Action, and then click Rescan Disks. Right-click any disk marked Foreign, click Import Foreign Disks, and then follow the on- screen instructions. 


To know more about the 70-680, click here.

Tagged as : Microsoft 70-680 Dumps, Download 70-680 pdf, 70-680 VCE, 70-680 pass4sure, examcollection 70-680